Rakstal
Construction | Installation | Service
Entrance gates
We deal with the construction, installation and service of sliding gates, entrance gates, swing gates, gates with operators, barriers, fences.
We manufacture gates for industry, within the framework of B2B cooperation as a subcontractor for short and long gate series, and for individual investors.
Our production plant is located in Stanislawice near Krakow, but the gates we produce are assembled all over Poland. We are happy to cooperate with foreign companies and our realisations can be found in France, Germany, Belgium, the Netherlands and Scandinavian countries.
In our factory, entrance gates are built using certified and attested steel components and load and weather-tested sliding and swing gate operator components.
We offer
Support at every stage
At Rakstal, you'll receive our support and expertise at every stage of the gate's creation. From foundation/footing information at the design stage, to training in the operation and performance of the systems once the gate has been completed.
We design and manufacture
Sliding, swing and folding gates for home and industry
Realisations
Industrial doors Sliding gates Other
Largest bifolding gate in Poland.
We have to honestly admit that this is probably the largest breakaway gate we have, not only produced, but also seen. The gate was created for a business client and we have to boast that this amazing structure is as much as 10 metres of entry light. The whole thing runs lightly, thanks to the use of [...]
Gates for the home Other
Full double folding gate.
As you have probably already noticed, folding gates are appearing more and more frequently in our projects. The practicality of this solution cannot be underestimated, which is reflected in the growing number of orders specifically for this type of entrance gate. Functionality, accompanied by an attractive and certainly [...]
Industrial doors Sliding gates
Graphite gate for archives in Nowy Sącz.
A sliding gate in a beautiful graphite colour was installed on the premises of the municipal archive in Nowy Sącz. And as the gate was of a considerable size, we had to use specialist equipment for the installation. The dark graphite colour of the sliding gate perfectly matches the façade colour of the modern [...]
Gates for the home Swing gates
Grey gateway.
In our realisations section you will find many designs of entrance gates. So far, graphite - for houses and green or galvanised for industry - have prevailed. But we are noticing a change in this trend, which is why today we are presenting one that was recently made in our factory. Installation [...]
Sliding gates
A openwork gate.
We have even shared this realisation twice on our company Facebook page. A seemingly ordinary gate as a tight partition defending access to the interior, but a closer look will tell you what is so special about it. We made an openwork [...] for a foreign client.
Industrial doors Sliding gates Swing gates
Gate for strategic facility.
Certain types of doors are bespoke products. Massive, reinforced, equipped with anti-intrusion features. This is how a gate for a strategic facility is prepared in our factory. The height and width of the gate are non-standard, and additional elements such as metal spikes crowning the wings [...]
select specialists
Door manufacturer
perfect
Design
Give us a call or send us an e-mail. Prepare the necessary information for the gate you are planning, such as the length and height of the leaf, and include photos of your chosen designs to help us design your entrance gate.
accurate
Production
Once all the details have been agreed, we will take measurements to ensure that your new gate will fit perfectly into the prepared entrance. We will make the gate, subject the whole thing to galvanisation and painting. Finally, we will select the operator including automation.
neat
Assembly and service
As soon as the gate is ready, we proceed to expertly install the gate and operator. Remember, with the passage of time each gate may need adjustment. Our expert technicians will guarantee a smooth service.
Examples of sliding gate designs
Sliding gate with vertical infill
MODEL A
The dimensions of the gate rail are selected according to the size of the gate and start from 80×80 and go up to 120×100. The gate frame is formed from profiles from 60×40 to 80×80 and the infill can be from profiles with the following dimensions: 20×20 25×25 30×18 40×20 60×20 80×20 100×20 Each gate is hot-dip galvanised and can be powder coated in any RAL colour. The gate is supplied with posts in solo or portal versions. A toothed bar for the door drive - module 4 - is mounted on the bottom rail.
Sliding gate with horizontal infill
MODEL B
The dimensions of the gate rail are selected according to the size of the gate and start at 80×80 and go up to 120×100. The gate frame is made of profiles from 60×40 to 80×80 and the infill can be of profiles with the following dimensions 20×20 25×25 30×18 40×20 60×20 80×20 100×20. Each gate is hot-dip galvanised and can be powder-coated in any RAL colour. The gate is supplied with posts in solo or portal versions. A toothed bar for the door drive - module 4 - is mounted on the bottom rail.
Sliding gate with mesh infill
MODEL C
The dimensions of the gate rail are selected to suit the size of the gate and start at 80×80 and go up to 120×100. The gate frame is formed from profiles from 60×40 to 80×80. Each gate is hot-dip galvanised and can be powder-coated in any RAL colour. The gate is supplied with posts in solo or portal versions. A toothed bar for the door drive - module 4 - is mounted on the bottom rail.
Sliding gate with sheet metal panels
MODEL D
The dimensions of the gate rail are selected to suit the size of the gate and start at 80×80 and go up to 120×100. The gate frame is formed from profiles from 60×40 to 80×80. Each gate is hot-dip galvanised and can be powder-coated in any RAL colour. The gate is supplied with posts in solo or portal versions. A toothed bar for the door drive - module 4 - is mounted on the bottom rail.
Sliding gate without infill
MODEL E
Sliding gates for self-filling. The dimensions of the gate rail are selected according to the size of the gate and start at 80×80 and go up to 120×100. The gate frame is formed from profiles from 60×40 to 80×80,. Each gate is hot-dip galvanised and can be powder-coated in any RAL colour. The gate is supplied with posts in solo or portal versions. A toothed bar for the door drive - module 4 - is mounted on the bottom rail.
Individual gate
YOU HAVEN'T FOUND A DESIGN TO YOUR LIKING? WE WILL DESIGN A GATE FOR YOU!
Industrial and residential gates
FOLDING GATES
The bifold gate is the ideal solution for properties with limited entry space. This type of gate is made up of several wings that fold open when opened.
Cooperation
We are a reliable contractor and our services are used by companies from Poland and Europe looking for a main contractor, subcontractor or partner to supply gates and steel and aluminium structures.
